Utah PLSS Quarter Quarter Sections GCDB
Last update · December 15, 2020
PLSS Quarter Quarter Sections GCBD is a polygon dataset. Second division (QuarterQuarter) data is commonly an aliquot part of quarter sections but could be a lot or other division. GCDB base attribute data was used to create the second division feature class.
Use the data
Explore and Download
Utah PLSS Quarter Quarter Sections GCDB , opens in a new tab in the SGID on ArcGIS Utah PLSS Quarter Quarter Sections GCDB feature service , opens in a new tabQuick clips
Feature service URL
https://services1.arcgis.com/99lidPhWCzftIe9K/ArcGIS/rest/services/UtahPLSSQuarterQuarterSections_GCDB/FeatureServer/0
Open SGID sample query
select * from cadastre.plss_quarter_quarter_sections_gcdb limit 10;
Getting started
Tip
A closer look
Lots were dissolved to the section level. Survey_type: B (aliquot parts less than 40 acres) for geopolitical splits were attributed as Survey_type: A. This data is derived from the PLSS Intersected feature class of the Utah PLSS Fabric GISv2.3 2020. This layer is based on Geographic Coordinate Data Base (GCDB) coordinate data. The locations of Public Land Survey System (PLSS) corners, as represented in geographic coordinate pairs, were derived from a variety of source documents, which include U.S. General Land Office and BLM survey plats/notes, as well as survey data obtained from other U.S. Government agencies, private sector survey firms, and local governments. The attributes assigned to PLSS polygons were taken from the BLM's Legal Land Description (LLD) data set, contained within the Legacy Rehost for the year 2000 (LR2000) automated records system. The coordinate data was produced by using control stations of known location, with varying degrees of accuracy, from various sources which include but are not limited to; U.S. Geological Survey (USGS) topological quadrangles and other sources, National Geodetic Survey (NGS) and US Coast & Geodetic Survey (USC&GS) Cooperative Base Network (CBN) control, Federal Base Network control (FBN), and Continuous Operating Reference Stations (CORS), and Global Positioning System (GPS) data, which is then analyzed and adjusted in concert with official survey data for any given geographic area. This data is a useful representation of the geometry and topology of parcels contained within the PLSS, but its application is intended for mapping purposes only. The GCDB data is not a substitute for a legal land survey.
The native spatial reference for this dataset is UTM Zone 12N, NAD83 (0.01 meter x,y coordinate precision; 0.001 mile m coordinate precision). There are no constraints or warranties with regard to the use of this dataset. Users are encouraged to attribute content to UGRC. This statewide dataset is maintained by UGRC in partnership with the BLM and local government. The geographic coordinates and their associated products are NOT legal land survey records. The coordinates can NOT be used as a substitute for a legal land survey. They can be used for record keeping, mapping, graphics and planning purposes only. No warranty is made by the Bureau of Land Management for use of the data for purposes not intended by BLM.
Updates were made to Quarter Quarter Sections in Utah County to add quarter-quarter sections to areas that were not broken down less than the Section level. These are labeled as SECDIVTYP = Z and SECDIVTXT = Unsurveyed Unprotracted. They were added, using information from points collected by county surveyors, that is in the data and extrapolating information from adjoining sections wherever possible. They are still areas that could not be interpreted well enough and they were left empty, beyond the section level. In the future this data will continue to be carried in this feature class but not incorporated into the official PLSS Fabric.
Update history
- December 15, 2020
- October 15, 2019
- January 15, 2019
- January 1, 2018
- November 1, 2016
- August 28, 2015
PLSS at a glance
Example Description: A parcel of land situated in the south half of the southeast quarter of the northeast quarter of Section 31, Township 2 South, Range 2 West, Salt Lake Base and Meridian.
Township and range explained
(5 characters each)
- 3 digits for Township or Range number
- 1 digit for fraction (0 for no fraction, 1 for 1/4 township, 2 for 1/2 township, 3 for 3/4 township)
- 1 letter for direction
Geographic Coordinate Data Base (GCDB) is explained
Bureau of Land
Management (BLM)
Point IDs
GCDB Point ID
This 6 digit number is the combination of two three letter sequences - XxxYyy
.
- The first 3 digits (Xxx)
-
Xxx - may be the same for all points in a similar survey.
- 711 - 719 Town Sites, City Boundaries
- 720 - 739 County Boundaries
- 740 - 769 State Boundaries
- 770 - 799 Forest Service, Parks Service, Reservations,
- Grant, Other Boundaries with Mileposts.
- 800 - 836 Meanders (right bank even #, left bank odd #.)
- 837 - 879 Tracts
- 880 - 899 Right of Ways
- 900 - 999 Mineral Surveys, Homestead Entries, etc.
- The last 3 digits (Yyy)
-
Yyy - Numbered sequentially along the survey in increments of 10. The prefix
- Irregularities of Townships for the first index of [X]xx and [Y]yy
-
1, 2, 8 or 9 → offset corners along interior section lines and section subdivision lines where +/- 2 is the recommended naming scheme.
3 or 7 → offset corners along township boundaries, angle points, witness corners, and witness points.
4 or 6 → intersections of rectangular/special surveys and 1/16th corners of elongated sections.
0 → all regular aliquot corners down to 1/16th.
5 → all regular aliquot corners down to 1/256th.
Common conversions
Distance Conversions
- 1 Mile
-
- → 80 chains
- → 320 rods
- → 320 perches
- → 320 poles
- → 5,280 feet
- → 8,000 links
- → 1,609.2655 meters
- 1 Chain
-
- → 4 rods
- → 4 perches
- → 4 poles
- → 66 feet
- → 100 links
- → 20.1168 meters
- 1 inch
-
- → 0.0254 meters
- 1 Link
-
- → 0.66 feet
- → 7.92 inches
- → 0.2017 meters
- 1 Meter
-
- → 39.370 inches
- → 3.281 feet
- 1 Rod
-
- → 16.5 feet
- 1 Perch
-
- → 25 links
- 1 Pole
-
- → 5.0292 meters
- 1 Foot
-
- → 0.3048 meters
Area Conversions
- 1 Sq. Mile
-
- → Nominal Section
- → 640 acres
- → 2.590 sq. km.
- → 259 hectares
- 1 Acre
-
- → 10 sq. chains
- → 160 sq. rods
- → 160 perches
- → 160 poles
- → 43,560 sq. feet
- → 0.4047 hectare
- → 4,047 sq. meters
- 1 Hectare
-
- → 2.47 acres
- 1 Sq. Meter
-
- → 10.764 sq. ft.